Table of Contents
Advertisement
A30F03A
TYPICAL
1. Adjustment screw
2. Retaining screw
3. Wheel cap removal
– Retighten retaining screws.
– Check track alignment as described below.
Alignment
Before checking track alignment, ensure that the track is free
of all particles which could be thrown out while track is rotat-
ing. Keep hands, tools, feet and clothing clear of track. Ensure
no one is standing in close proximity to the snowmobile. Never
rotate track at high speed.
Start the engine and accelerate slightly so that track barely turns. This
must be done in a short period of time (15 to 20 seconds).
Check that the track is well centered; equal distance on both sides
between edges of track guides and slider shoes.
142
3
WARNING
2
1
Advertisement
Table of Contents
