Table of Contents
Advertisement
DESS/RER pilot lamp and warning buzzer will stop.
Apply throttle slowly and evenly. Allow drive pulley to engage then
accelerate carefully.
RER Modification at High Altitude
General
At high altitude, the RER system needs a different engine timing
curve to work properly.
Operation
The MX-Z Renegade 600 HO SDI is equipped with a Engine Manage-
ment System (EMS). This system takes care of the altitude mode
required by the RER.
No RER button operation is needed to select a mode. Just follow
SHIFTING IN REVERSE above.
6) Reverse Pilot Lamp
This pilot lamp will light up when reverse is selected.
7) Handlebar
The handlebar controls the steering of the snowmobile. As the han-
dlebar is rotated to right or left, the skis are turned right or left to steer
the snowmobile.
Fast reverse while turning, could result in loss of stability and
control.
Steering Column Position Adjustment
Steering column position is adjustable. Proceed as follows.
There are 2 positions.
NOTE: Following procedure describes how to change steering col-
umn position from rearward to forward position.
Unscrew 4 bolts retaining windshield assembly to handlebar. Re-
move windshield assembly.
WARNING
47
Advertisement
Table of Contents
