BOMBARDIER SKI-DOO MX-Z Renegade 600 HO SDI Operator's Manual page 144

A01F05A
1. Guides
2. Slider shoes
3. Equal distance
To Adjust Track Alignment:
Remove tether cord cap before performing any maintenance
or adjustment, unless otherwise specified. Vehicle must be
parked in a safe place, away from the trail.
– Remove the tether cord cap.
– Loosen rear idler wheel retaining screws.
– Tighten the adjustment screw on side where the slider shoe is the
farthest from the track insert guides.
A01F0BA
1. Guides
2. Slider shoes
3. Tighten on this side
WARNING
1
3
1
2
3
2
1
143