Table of Contents
Advertisement
Only perform procedures as detailed in this guide. Unless other-
wise specified, engine should be turned OFF and cold for all lubri-
cation, adjustment and maintenance procedures.
Electric start models only: Never charge or boost a battery while
installed on snowmobile.
The engine and components used in a particular model should not
TM
be used on other models. Use of Rotax
snowmobile engines in
other than SKI-DOO snowmobiles is not recommended or autho-
rized by Bombardier Inc.or its subsidiaries.
TM
Electronic reverse (RER
) models only: The shifting to reverse
mode on these snowmobiles is done by the push of the RER button
when the engine is running. Wait until the reverse alarm sounds
and the Rotax Electronic Reverse (RER) pilot lamp comes on in the
dashboard before operating throttle to proceed in reverse. The re-
verse speed of these snowmobiles is not limited. Always proceed
with caution as fast reverse could result in loss of vehicle stability
and control. Come to complete stop before depressing RER button.
Always remain seated and apply the brake before shifting. Ensure
the path behind is clear of obstacles or bystanders before proceed-
ing.
Models with mechanical reverse: The reverse speed of these
snowmobiles is not limited. Always proceed with caution as fast
reverse could result in loss of vehicle stability and control. Come
to complete stop before selecting reverse gear. Wait until the re-
verse alarm sounds before operating throttle to proceed in re-
verse. Always remain seated and apply the brake before shifting.
Ensure the path behind is clear of obstacles or bystanders before
proceeding.
10
Advertisement
Table of Contents
