Table of Contents
Advertisement
NOTE: ALWAYS USE A 35 WATTS BULB. If
a 55 watts bulb is used, the regulator might
not be able to recharge the battery properly.
Properly reinstall removed parts in the re-
verse order of their removal.
CAUTION: Never touch glass portion of a
halogen bulb with bare fingers, it shortens its
operating life. If glass is touched, clean it with
isopropyl alcohol which will not leave a film on
the bulb.
Tachometer
The bulb in the tachometer is not replaceable.
If the tachometer bulb is burnt, replace the ta-
chometer. See an authorized Bombardier
ATV dealer.
Indicator Lamp Replacement
Removal
Remove the control panel.
Unplug wires on indicator lamp.
Press both taps then pull indicator lamp out of
hole.
1
V02A0FY
1. Tabs
Installation
For installation, reverse the removal proce-
dure.
104
Beam Aiming Adjustment
Remove the front fascia.
Using a long screwdriver, turn the adjusting
screw clockwise to lift the inside of headlamp
and counterclockwise to go down it.
V02G1QY
1. Headlamp
2. Adjusting screw
Adjust beam height to your convenience then
reinstall the front fascia.
1
1
2
Hide quick links:
Advertisement
Table of Contents
