Installing The Hard Drive - Avaya S8500 Job Aid

Job Aid: Replacing the Hard Drive on the Avaya S8500 Media Server— R2.2 or Later

Installing the hard drive

To install the hard drive:
1. Position the hard drive on the drive tray and secure with the four screws.
2. Slide the hard drive into the media server (see
drive on page 9).
3. Reinstall the bezel.
4. Return to
with the listed tasks.
Replacing the hard drive in the S8500 media server
This procedure contains the following sections:
Removing the cover of the S8500 media server
●
Removing the hard drive from the S8500 media server
●
Installing the new hard drive in the S8500 media server
●
Replacing the cover of the S8500 media server
●
Removing the cover of the S8500 media server
For these steps, see
server on page 11.
1. With the media server extended on the slide rails, loosen the 2 captive screws on the back
of the media server that hold the top in place.
2. Slide the media server cover back from the front panel until the cover's tabs are released
from the top slot of the front panel.
3. Lift the cover straight up and remove it from the media server.
10 Replacing the Hard Drive on the Avaya 8500 Media Server
Tasks for replacing a hard drive on an S8500 Media Server
Figure 2: Removing and replacing the cover on the S8500 media
Figure 1: Removing/installing the hard
on page 3 to continue