Avaya S8500 Job Aid page 12

Job Aid: Replacing the Hard Drive on the Avaya S8500 Media Server— R2.2 or Later
8. Remove the four screws (two on each side) securing the hard drive in the drive cage and
remove the hard drive.
Figure 3: Removing and replacing the drive cage
Figure notes:
1. Drive bay housing drive cage
2. Ribbon cable attached to hard
drive
3. Cable connected to the CD-ROM
drive
4. Captive screw holding drive cage
Installing the new hard drive in the S8500 media server
For these steps, see
1. Insert the new hard drive into the drive cage so that the connectors are in the same
direction as the CD-ROM connectors and the screw holes are aligned.
2. Reinsert the 4 screws (2 on each side) to attach the hard drive to the drive cage.
3. Reattach the flat ribbon cable (in 2 places) to the hard drive and CD-ROM drive.
12 Replacing the Hard Drive on the Avaya 8500 Media Server
6
8
d is
c
7
6
3
2
1
Figure 3.
4
6
5
5. Tabs
6. Screws holding hard drive in drive
cage
7. Hard drive
8. Drive cage
h3msdrv3 KLC 020204