Avaya S8500 Job Aid page 19

2. Click Continue through the Review Notices to get to the Select Method for Configuring
Server page.
3. Select "Configure all services using the wizard."
4. Click Continue through all the screens to verify that the configuration is complete and
correct.
Note:
You might need to reset the port speeds for the Ethernet interfaces.
Note:
Note:
You do not need to fill in the static routes for Release 2.0 and later.
Note:
5. When you click through all the pages, click Continue on the Update System screen. The
Update System screen displays each configuration task as it completes.
When done, the screen displays "All configuration information was entered."
6. Click Close Window to close the Configure Server wizard.
Expanded Procedures
555-245-761 Issue 3 January 2005 19