Table of Contents
Advertisement
Internal Web Page
The DTP2 CrossPoint 82 switchers feature an internal web server, displayed as a web page.
This page allows you to monitor and adjust certain settings of the DTP2 CrossPoint 82 via a
LAN or WAN connection. Use a web browser to view the pages on a PC connected to the
switcher LAN port.
NOTE: The switcher internal web page does not support compatibility mode in
This section gives an overview of the internal web page, which is always available and
cannot be erased or overwritten. Topics in this section include:
•
•
Accessing the Web Page
1.
2.
3.
4.
5.
6.
7.
Microsoft
Internet Explorer
®
Extron recommends using Mozilla
Accessing the Web Page
Web Page Components
Connect the switcher to a LAN or WAN using the rear panel RJ-45 LAN connector (see
figures 4 and
5,
, on page 14, or
Q
Open a web browser on a connected PC.
Enter the IP address of the device in the browser Address field.
NOTE: The default IP address is 192.168.254.254.
Press the <Enter> key on the keyboard. The Sign in window opens (see figure 47).
In the Username field (see figure 47,
Figure 47.
Example of a Network Password Dialog Box
Enter the password if one is assigned.
NOTE: The factory configured passwords for all accounts on this device have been
set to the device serial number. Passwords are case sensitive. In the event of an
absolute system reset, these passwords are reset to no password.
To change the password, see
Click the Sign In button (see figure 47,
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Internal Web Pages
(see
Disabling Compatibility Mode
®
Firefox
or Google Chrome™.
®
®
figure
8,
, on page 19).
5
), enter admin or user (optional).
1
Setting a password
, on the previous page).
2
on page 105).
on page 108.
104
Advertisement
Table of Contents
