Advertisement
TOUCH 2 WITH GO – GPS signal related issues
Symptoms:
1-
C-HR only: GPS signal reception improvement
1- C-HR only: GPS signal reception improvement
Phenomenon description:
After "ignition on" the Touch2 with Go navigation of Toyota C-HR does not quickly enough
acquire the GPS signal to ensure a stable location fix and they will experience that the GPS
position drifts away from the actual position. After a couple of minutes the signal will be
acquired and the displayed position will reflect the actual position.
In the original position, the GPS antenna receives additional EM noise input from DA and GSP
(forward camera). The GPS antenna needs to be relocated.
Follow the repair instructions from TSB BE-0063T-0717
Find the TSB on NG Techdoc. (See hyperlink on the bottom of the page)
Top page
How to access the Service Menu
How to check DTC codes
How to Identify T2wG and Device
How to access the Repair Manual
How to install latest softwares
ID
NG Techdoc
Unknown issue
DA
DA & Ext. Box
Advertisement
