Advertisement
2- Prius+: Touch screen doesn't respond at a cold or hot temperatures
Phenomenon description:
When touching the screen, intermittently there is no response to its command. After the
temperature in the vehicle becomes normal, the touch screen works good again.
About the low temperature, this phenomenon happens only at temperatures below 10
degrees Celsius. After the temperature in the vehicle becomes above 10 degrees, the touch
screen works again.
Supplier : Panasonic
This phenomenon can occur on the following vehicle (see table) on DA software lower than
mentioned in below table.
The problem has been resolved as from the software version shown below table or higher.
Vehicle Model
Minimum Required Software Version
Prius+
71801014c / 9501014b
How to fix:
Install latest released DA Software. (See hyperlink on the bottom of the page)
Top page
DA
ID
NG Techdoc
How to Identify T2wG and Device
How to access the Repair Manual
How to access the Service Menu
Unknown issue
DA & Ext. Box
How to check DTC codes
How to install latest softwares
Advertisement
