Advertisement
TOUCH 2 WITH GO - AM/FM relates issues
Symptoms:
1-
The audio source is changed from FM / AM to USB after ignition off / on cycle x
1- The audio source is changed from FM / AM to USB after ignition off / on cycle x
Phenomenon description:
The audio source is changed from FM / AM to USB after ignition off / on cycle
Supplier: Harman
This phenomenon can occur on Extension Box software lower than mentioned in below table.
The problem has been resolved as from the software version shown below table or higher.
Minimum Required Software Version: 6.10.0
How to fix:
Install latest released Extension Box Software. (See hyperlink on the bottom of the page)
Top page
How to access the Service Menu
How to check DTC codes
How to Identify T2wG and Device
How to access the Repair Manual
How to install latest softwares
ID
NG Techdoc
Unknown issue
DA
DA & Ext. Box
Advertisement
