Drive System Maintenance; Checking The Tire Pressure; Checking The Wheel-Lug Nuts; Checking The Wheel-Hub Nut - Toro Spray Master Series Operator's Manual

Drive System
Maintenance

Checking the Tire Pressure

Service Interval: Every 50 hours
Tire air pressure specification: 110 to 138 kPa (16
to 20 psi)
Important:
Do not exceed the maximum air
pressure indicated on the sidewall of the tire.
Note:
Do not add any type of tire liner or foam fill
material to the tires.
Figure 87
Checking the Wheel-Lug
Nuts
Check and torque the wheel-lug nuts
129 N∙m (95 ft-lb), if needed.
1. Wheel-lug nut
g001055
Checking the Wheel-Hub
Nut
Service Interval: After the first 100 hours
Every 500 hours
Check and torque the wheel-hub nut
319 N∙m (235 ft-lb), if needed.
65
(Figure
Figure 88
2. Wheel-hub nut
(Figure
88) to
g311487
88) to