Engine Oil Specification; Checking The Engine-Oil Level - Toro Spray Master Series Operator's Manual

Figure 67
1. Clip
2. Cover
3. Plate
4. Knob
8. Install the knee pad; refer to
Pad (page 52).
g313100
5. Cartridge
6. Foam pre-cleaner
7. Body
Installing the Knee

Engine Oil Specification

Oil Type: Toro 4-Cycle Premium Engine Oil or a
high-quality detergent oil (including synthetic) API
service SJ or higher
Oil viscosity: Refer to the table below.
Checking the Engine-Oil
Level
Service Interval: Before each use or daily
Important:
Do not operate the engine with the oil
level below the Low (or Add) mark on the dipstick,
or over the Full mark.
1. Move the machine to a level surface.
2. Prepare the machine for maintenance; refer to
Preparing the Machine (page
3. Remove the dipstick from the engine and wipe
the dipstick with a clean rag
1. Dipstick and filler neck
4. Insert the dipstick into the engine
55
Figure 68
51).
(Figure 69).
Figure 69
(Figure
g312926
g312938
70.