Setup; Checking The Tire Air Pressure; Checking The Engine-Oil Level; Checking The Hydraulic-Fluid Level - Toro Spray Master Series Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
4
5
Media and Additional Parts
Description
Operator's Manual
Key
1
Checking the Tire Air
Pressure
No Parts Required
Procedure
Check the air pressure in the front and rear tires, and
if necessary, add air to the appropriate pressure; refer
to Checking the Tire Pressure (page
2
Checking the Engine-Oil
Level
No Parts Required
Procedure
The engine comes with oil; check the engine-oil level
and, if necessary, add to the appropriate level; refer to
Checking the Engine-Oil Level (page 55)
Engine Oil to the Engine (page
Description
No parts required
No parts required
65).
and
57).
Qty.
–
–
Qty.
1 Read before operating the machine.
2
Start the machine.
3
Checking the
Hydraulic-Fluid Level
No Parts Required
Procedure
The hydraulic tank comes with fluid; check
hydraulic-fluid level in the hydraulic tank, and if
necessary, add to the appropriate level; refer to
Checking the Hydraulic Fluid Level (page
Adding
10
Use
Connect the battery.
Lower the anti-tip brackets.
Use
70).