Recommended Maintenance Schedule(S) - Toro Spray Master Series Operator's Manual

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
After the first 100 hours
Before each use or daily
After each use
Every 25 hours
Every 40 hours
Every 50 hours
Every 80 hours
Every 100 hours
Every 100 hours or yearly,
whichever comes first
Every 400 hours
Every 500 hours
Monthly
Yearly
Yearly or before storage
Maintenance Procedure
• Change the engine oil.
• Check the wheel-hub nut torque.
• Change the hydraulic fluid and filter.
• Check the engine-oil level.
• Check the hydraulic-fluid level.
• Check the machine for loose hardware.
• Clean and lubricate the spreader.
• Clean the sprayer system.
• Clean the strainer.
• Clean the sprayer nozzles.
• Clean the engine and the exhaust system area
• Clean the grass and debris buildup from the machine.
• Check the foam pre-cleaner; replace if dirty (more often under severe conditions).
• Check the hydraulic hoses and fittings for leaks, damage, or wear. Repair any
leaking, damaged, or worn hydraulic components.
• Check the tire pressure.
• Check the sprayer system.
• Check the spreader system.
• Remove the engine shrouds and clean the cooling fins.
• Lubricate the grease fittings.
• Grease the belt tensioner.
• Change the engine oil (more often under severe condition).
• Service the spark plugs.
• Clean or change the air filter.
• Replace the air filter.
• Replace the fuel filter.
• Check the wheel-hub nut torque.
• Change the hydraulic fluid and filter.
• Check the battery.
• Check the wheel-lug nut torque.
• Lubricate the caster-axle bearings.
• Prepare the machine for storage.
50