Controls; Machine Controls - Toro Spray Master Series Operator's Manual

Controls

Become familiar with all the controls before you start
the engine and operate the machine.

Machine Controls

1. Motion-control levers
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction
Display
The sprayer and information display
the following information:
•
Ground speed (mph)
•
Time of day
•
Air temperature
•
Battery voltage
Figure 6
2. Display
(Figure
(Figure 6) shows
Caster-Lock Pedal
Press and hold the caster-lock pedal
the caster wheels in the straight position.
Release the caster-lock pedal to unlock the caster
wheels to allow turning.
g317350
1. Caster-lock pedal
Parking-Brake Lever
•
To engage the parking brake
parking-brake lever down.
Note:
The brake lever engages a parking brake
6).
in the transaxle.
•
To release the parking brake, pull the lever up.
1. Park-brake lever
Note:
When parking on a steep slope, chock or block
the wheels in addition to engaging the parking brake.
When transporting the machine, engage the parking
brake and bind the machine to the transport vehicle.
13
(Figure 7) to lock
Figure 7
(Figure 8), push the
Figure 8
g311535
g311416