Using Hold And Disconnect On External Callers; Ending A Conference Call - Toshiba Strata CS User Manual

Using Hold and Disconnect on external callers

Ending a conference call

C 11. P
HAPTER LACING
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
You can put individuals in a conference call on hold, or disconnect them, but only
if they are external callers. You cannot place users on hold or disconnect them.
To place an external call on hold or disconnect:
1.
Select the external caller in the Call Monitor or the Calls pane.
2.
Choose
Actions > Hold
A conference call normally ends with all parties hanging up at roughly the same
time. If you leave the conference call early, however, keep in mind that the
conference continues without you. The other participants can continue to talk,
even if you started the conference and your company is paying for the outgoing
calls used to create it. To terminate the call, each participant must hang up, or you
must disconnect all parties.
C C
ALLS IN THE LIENT
or
Actions > Disconnect
.
11-11