Software Revision Level - Genie GS-2646AV Service And Repair Manual

Service and Repair Manual
Ground Controls
Ground Controls with Powered Extension Deck
13 machine setup, escape button
14 machine setup, scroll up button
15 LCD readout
16 machine setup, scroll down button
17 machine setup, enter button
18 selector switch KS1
19 red Emergency Stop P1
20 circuit breaker CB2
21 powered extension deck extend button
22 powered extension deck retract button
23 powered extension deck enable button
24 ECM U5
25 platform down button
26 lift function enable button
27 platform up button
16
2-1

Software Revision Level

How to Determine the Software
Revision Level
The machine software revision level is displayed at
the ground controls LCD display.
1 Turn the selector/key switch to the ground
controls or platform controls position. Pull out
the red Emergency Stop button to the on
position at both ground and platform controls.
Result: The display at the platform controls will
show "CH". See example below.
Result: The display at the ground controls will
show the machine model and hour meter
information. After 3 seconds, the machine
model will not show on the display. See
example below.
GS-2646 AV • GS-2646 AV35
September 2016
Part No. 1272218