Machine Setup - Genie GS-2646AV Service And Repair Manual

September 2016
2 Press the ground control scroll down button.
Result: The ground control LCD display will
indicate the software revision and hour meter
information. After 5 seconds, the ground
controls LCD display will display machine
model and hour meter information again. See
example below.
3 Push in the red Emergency Stop button to the
off position at both the ground and platform
controls and turn the selector/key switch to the
off position.
a ground control LCD display
b ground control scroll down button
Part No. 1272218
2-2

Machine Setup

How to Setup the Machine from
Ground Controls
The ground controls can be used to setup the
machine parameters from the ground. Features
that can be adjusted from the ground controls
include machine Model, Options and Speed setup.
This menu can only be entered from ground
controls with the selector/key switch in the ground
controls position.
Note: Select a test area that is firm, level and free
of obstructions.
1 Turn the selector/key switch to the ground
controls position and pull out the red
Emergency Stop button to the on position at
the platform controls.
GS-2646 AV • GS-2646 AV35
Service and Repair Manual
Ground Controls
Tip-over hazard. Do not adjust
function speeds higher than
specified in this procedure.
Setting the function speeds
greater than specifications could
cause the machine to tip over
resulting in death or serious
injury.
Tip-over hazard. Do not adjust
function speeds higher than
specified in this procedure.
Setting the function speeds
greater than specifications could
cause the machine to tip over
resulting in death or serious
injury.
17