Plotting Area - Roland DPX-3700A User Manual

When using paper not supplied by Roland DG Corp., observe the follow-
ing points in making your selection:
• Does the ink work well with the paper? (Moisture absorption characteristics, coloration)
• Is the ink faint? (At the rated pen speed)
• Does the ink spread? (Line thickness should not change with time)
• Speed of drying (If one line crosses another, ink should not mix)
• Does pen clog?
• Other factors such as paper strength, etc.

12 Plotting Area

• The table below shows the values in effect when [Origin] in the display menu is set to [DPX] (default values).
• When [Guide] is selected using the [PaperSet] menu and the paper is loaded in the paper guide located in the
lower left of the drawing board, the plotting area is reduced by 7 mm (1/4") in each of the four directions
(top, bottom, left, and right).
Unit mm
P a p e r X
ISO A1 *1 841
ISO A2 594
ISO A3 420
ISO A4 *2 297
ISO B2 *1 707
ISO B3 500
ISO B4 353
ISO B5 *2 250
JIS A1 *1 841
JIS A2 594
JIS A3 420
JIS A4 *2 297
JIS B2 *1 728
JIS B3 515
JIS B4 364
JIS B5 *2 257
ANSI D *1 863.6
ANSI C 558.8
ANSI B 431.8
ANSI A *2 279.4
ANSI Arch. D *1 914.4
ANSI Arch. C *1 609.6
DIN A1 *1 [915]
DIN A2 [625]
DIN A3 [450]
DIN A4 *2 [330]
*1 Supported on DPX-3700A only.
*2 Paper is normally loaded horizontally (i.e., landscape orientation). However, the sizes of paper indicated by "*2" must use
vertical (portrait) orientation.
Values in square brackets ("[ ]") are the DIN size settings for this product. They do not represent DIN standards (plotting area).
Paper size
inch
Y X Y LLx
594 -432.50 -297.00 408.50 297.00
420 -309.00 -210.00 285.00 210.00
297 -222.00 -148.50 198.00 148.50
210 -148.50 -117.00 148.50
500 -365.50 -250.00 341.50 250.00
353 -262.00 -176.50 238.00 176.50
250 -188.50 -125.00 164.50 125.00
176 -125.00 -100.00 125.00
594 -432.50 -297.00 408.50 297.00
420 -309.00 -210.00 285.00 210.00
297 -222.00 -148.50 198.00 148.50
210 -148.50 -117.00 148.50
515 -376.00 -257.50 352.00 257.50
364 -269.50 -182.00 245.50 182.00
257 -194.00 -128.50 170.00 128.50
182 -128.50 -103.00 128.50
558.8 34 22 -443.75 -279.50 419.75 279.50
431.8 22 17 -291.50 -216.00 267.50 216.00
279.4 17 11 -228.00 -139.75 204.00 139.75
215.9 11 8.5 -139.75 -120.00 139.75
609.6 36 24 -469.20 -304.80 445.20 304.80
457.2 24 18 -316.80 -228.60 292.80 228.60
[655] -432.50 -297.00 408.50 297.00
[450] -309.00 -210.00 285.00 210.00
[330] -222.00 -148.50 198.00 148.50
[240] -148.50 -117.00 148.50
Plotting area
RD-GLII
mm mm
LLy URx URy
93.00
76.00
93.00
79.00
96.00
93.00
17
RD-GLIII
mm mm
LLx LLy URx URy
0 0 841.00 594.00
0 0 594.00 420.00
0 0 420.00 297.00
0 0 297.00 210.00
0 0 707.00 500.00
0 0 500.00 353.00
0 0 353.00 250.00
0 0 250.00 176.00
0 0 841.00 594.00
0 0 594.00 420.00
0 0 420.00 297.00
0 0 297.00 210.00
0 0 728.00 515.00
0 0 515.00 364.00
0 0 364.00 257.00
0 0 257.00 182.00
0 0 863.50 559.00
0 0 559.00 432.00
0 0 432.00 279.50
0 0 279.50 216.00
0 0 914.40 609.60
0 0 609.60 457.20
0 0 841.00 594.00
0 0 594.00 420.00
0 0 420.00 297.00
0 0 297.00 210.00