Table of Contents
Advertisement
Side View
Parallel connector (Centronics specifications)
Used for connection to the computer with a
parallel cable.
Control Panel
Display
Setting menus and
error messages are
displayed.
VIEW LED
This LED lights when
the
key has
been pressed and the
unit is paused.
key
By pressing the
key, it is possible to
move the pen carriage to
the upper right of the
drawing board and pause
operation.
By pressing the
key again, you can
cancel the pause.
PAPER HOLD LED
Lights up during paper hold.
key
PAPER HOLD
Causes paper to stick to the drawing board.
This causes paper to stick to the drawing
board.
This key is also pressed to release this
adhesion.
Serial connector (RS-232C)
Used for connection to the
computer with a serial cable.
Position keys (
,
Handles pen carriage movement.
Is the
key is held down and a cursor key pressed,
the pen carriage will move quickly.
2
Power connector
Connects to the power cord
included with the main unit.
Power switch
,
,
and
keys
Used to select display
items.
key
Used to select the next
menu on the display.
key
Used to set the value
displayed for the item.
,
,
and
)
Advertisement
Table of Contents
