Table of Contents
Advertisement
21 Specification of DPX-3700A/2700A
Feature
Max. plotting area
Media sizes
ISO A1, A2, A3 and A4
ISO B2, B3, B4 and B5
JIS A1, A2, A3 and A4
JIS B2, B3, B4 and B5
DIN A1, A2, A3 and A4
ANSI D, C, B and A
ANSI Arch. D and C
Number of pens
Paper type
Pen type
Paper holding method
Max. plotting speed
Max. acceleration
Max. pen force
Number of pen up/down
Mechanical resolution
Software resolution
Distance accuracy
Repetition accuracy
Right-angle accuracy
Pen change accuracy
Interface
Buffer Size
Instruction system
Convenience features
Pencil Grouping function, Smoothing function (plots smooth lines for circles and arcs), High speed mode, Replot
Control switch
LED
Display
Power consumption
Acoustic noise level
External dimensions
Weight
Operating temperature
Operating humidity
The Specifications of the Interface
[Parallel]
Standard
In compliance with the specifications of Centronics
Input Signal
STROBE (1BIT), DATA (8BIT)
Output Signal
BUSY (1BIT), ACK (1BIT)
I/O Signal Level
TTL level
Transmission Method
Asynchronous
[Serial]
Standard
RS-232C specifications
Transmission Method
Asynchronous, duplex data transmission
Transmission Speed
1200, 2400, 4800, 9600, 19200
Parity Check
Odd, Even, None
Data Bits
7 bits or 8 bits
Stop Bits
1 bit or 2 bits
D P X - 3 7 0 0 A
X axis: 925 mm (36-3/8")
Y axis: 620 mm (24-3/8")
High quality paper (Chart paper), coated paper, tracing paper, drafting film,
vellum, water based OHP film and oil based OHP film
Non-refillable ink pen, Refillable ink pen, 32 color plotter pens, water based fiber tipped pen,
thick water based fiber tipped pen, ceramic pen, water based ball-point pen,
oil based fiber tipped pen, oil based pressurized ball point pen and multi-lead pencil
1131 mm/sec in 45° direction (when [HighSpeed] is selected)
Whichever the greater value of ±0.1 mm or ±0.05 % of moving distance (with drafting film)
±0.05 mm or less (same pen/with drafting film)
Parallel (in compliance with specifications of Centronics), Serial (RS-232C)
function (all plot and area plot), Pen sorting function, Dual independent axis alignment and Super fine pen mode
,
,
,
,
Liquid crystal display (16 characters x 2 lines)
0.5A/117 V
Drawing mode: less than 60 dB (A) (according to ISO 7779)
1214 mm (W) x 172 mm (H) x 841 mm (D)
(47-13/16" [W] x 6-13/16" [H] x 33-1/8" [D])
27 kg (59.5 lb.)
Flatbed
ISO A2, A3 and A4
ISO B3, B4 and B5
JIS A2, A3 and A4
JIS B3, B4 and B5
DIN A2, A3 and A4
ANSI C, B and A
8
Electrostatic Adsorption
1.4 G ( in 45° direction)
500 gf
33 repeats/sec.
0.005 mm/step
0.025 mm/step
±0.4 mm/600 mm
±0.25 mm or less
1M byte (800 Kbytes for replot buffer)
RD-GL II, RD-GL III
,
,
,
[VIEW] and [PAPER HOLD]
0.3A/220-230 V
0.3A/240 V
889 mm (W) x 172 mm (H) x 688 mm (D)
(35-1/16" [W] x 6-13/16" [H] x 27-1/8" [D])
5—40°C (41—104°F)
35 %—75 % (non-condensing)
48
D P X - 2 7 0 0 A
X axis: 600 mm (23-9/16")
Y axis: 467 mm (18-3/8")
,
,
,
,
,
24 kg (52.9 lb.)
Advertisement
Table of Contents
