Printable Area; Step 1: Turning The Power On - Roland VersaUV LEF-300 First Step Manual

First Time Printing

Printable Area

The maximum printable area is width 770 × length 330 × thickness 100 mm (width 30.32 × length 13 ×
thickness 3.94 in.)
* The maximum printable area is inside the square holes on the four corners of the flat table. (The holes are
included in the printable area.)
* The maximum size of the media and the printable area are different.

STEP 1: Turning the Power On

Close the front cover.
NOTE
Leave the main power switched on at all times.
Never switch off the main power. Leaving the main power on enables the automatic maintenance to be
carried out periodically. If the automatic maintenance is not carried out, the printer may malfunction. For
example, the print heads may be damaged.
Be sure to hold the handle of the front cover and keep holding it until the cover is
completely opened or closed.
If you do not open and close the front cover gently, it may break or you may be injured.
46
Flat table
(Front)
770 mm (30.32 in.)
Media
Flat table
(Rear)
Square hole
100 mm (3.94 in.)
Turn on the
main power.
Turn on the
sub power.