Table of Contents
Advertisement
6 Self-testing
A self-test can be carried out to check whether the DPX is functioning correctly. When doing this, the plotter does
not have to be connected to the computer.
1) Load pens in the DPX. You can load any number of pens,
from one to eight. Demonstration plotting uses all of the
pens that have been loaded.
2) Turn on the power to the DPX.
3) Load paper on the DPX (refer to "5 Loading the Paper" on
page 5).
Refer to "13 Display Menus Flowchart" on page 19 and set
the paper size of the display menu to match the size of the
paper loaded in the DPX.
4) The display will show the top menu. Press the
key.
5) Press the
key to execute the demonstration plot. The DPX then plots the self-test pattern.
When the pen is returned to the pen stock and the carriage moves to the upper right of the main unit, the self-
test is finished.
* If you do not want do a demonstration plot, press
key twice to display the following. Press the
.
7
Advertisement
Table of Contents
