Dimension Drawings; Reference To The Dimension Drawings In Sios - Siemens SIMOTICS M-1FE1 Configuration Manual

Dimension drawings

10.1

Reference to the dimension drawings in SIOS

You can find the dimension drawings for 1FE1 under Dimension drawings for the
SIMOTICS M-1FE1 (https://support.industry.siemens.com/cs/ww/de/view/109771183)
in SIOS.
Note
Siemens AG reserves the right to change the motor dimensions as part of design
improvements without prior notification.
You can also find the dimension drawings for the required motors in:
CAD CREATOR (http://www.siemens.com/cadcreator),
DT CONFIGURATOR (http://siemens.de/dt-konfigurator) or
Catalog NC62
mc/intraDocs/catalogs/nc622019/NC%2062%20-%202019%20-
%20Complete%20Catalog/motion-control-NC62-complete-English-2019.pdf)
Additional information about 1FE1 built-in motors is provided in the associated Hardware
Installation Manual
(https://support.industry.siemens.com/cs/ww/de/view/109745110/88061310347?dl=en
).
SIMOTICS M-1FE1 synchronous built-in motors
Configuration Manual, 09/2019, A5E47872980B AA
(https://intranet.for.siemens.com/org/i-dt-
10
133