Table of Contents
Advertisement
Assembly drawings/dimension sheets
Current dimension drawings are provided in the DT-KONFIGURATOR or in Chapter
"SIMOTICS Servomotors" in Catalog D 21.4
(https://support.industry.siemens.com/cs/document/109747019/) as print version or online.
DT CONFIGURATOR
In the DT CONFIGURATOR - you can simply and quickly find
● dimension drawings
● 2D/3D CAD data
The DT CONFIGURATOR supports you when generating plant/system documentation
regarding project-specific information.
Note
The 3D model in the DT CONFIGURATOR is a simplified representation that does not show
all of the details.
You can find further information on the Internet at DT Configurator
konfigurator):
Recency of dimension drawings
Note
Changing motor dimensions
Siemens AG reserves the right to change the dimensions of the motors as part of
mechanical design improvements without prior notice. This means that dimension drawings
can become out of date.
S-1FT7 synchronous motors
Configuration Manual, 09/2018, A5E45099423B AA
9
(http://siemens.de/dt-
397
Advertisement
Table of Contents
