Circuit Diagram Of The Motor - Siemens SIMOTICS M-1FE1 Configuration Manual

Electrical connection

8.2 Circuit diagram of the motor

8.2 Circuit diagram of the motor
The circuit diagram contains information about wiring and connecting the motor winding.
The circuit diagram is provided in the motor packaging.
1
11
12
13
2
3
4
4a
5
6
6a
7
8
Figure 8-1
Note
Connect a rotary encoder according to the project specifications.
106
Electrical cabinet
Voltage limiting (VPM), only if the EMF > 820 V
3RN2013-1GW30 tripping unit
SMC20/SME20, encoder on the motor side, 6FX2003-0SA12 connector kits, 12-pin
Power cable
DRIVE-CLiQ cable 6FX2002-1DC00_☐☐☐, trailable or conditionally trailable
Signal cable, trailable or only conditionally trailable, Article No. 6FX8002-2CA80-....
Conductor in the signal cable from the PTC to the 3RN2013-1GW30 tripping unit
Signal connector, 17 pin, external thread, Article No.: 6FX2003-0SA17-....
Optional mounting flange for retrofitting, Article No.: 6FX2003-7DX00
1FE1 built-in motor
Ground connection
Temperature sensor (+1 reserve)
Encoder
Circuit diagram for SINAMICS with 1FE1 motor (example)
SIMOTICS M-1FE1 synchronous built-in motors
Configuration Manual, 09/2019, A5E47872980B AA