Stator Assembly With/Without Cooling Jacket; Production Equipment, Mounting Tools And Other Equipment - Siemens SIMOTICS M-1FE1 Configuration Manual

Mounting
7.1 Mechanical mounting
7.1.2

Stator assembly with/without cooling jacket

7.1.2.1

Production equipment, mounting tools and other equipment

Provide the following production equipment, mounting tools and other equipment:
1
2
3
4
5
6
● Occupational safety equipment:
– Face protection shield
– Protective gloves
– Closed protective clothing for protection against high surface temperatures
● Hoisting gear with suitable load suspension device for the stator core
● Eyebolts or ring nuts and spacing sleeves
● Axial stop for cooling jacket/stator core without cooling jacket
● Internal tensioning spindle for the laminated stator core
● Plastic-covered support arm (for horizontal mounting)
● Anti-corrosion agent for steel surfaces
● Grease or talcum as lubricants for Viton O-ring seals
For the leak test with liquid:
● Water connection, maximum test pressure 0.7 MPa (7 bar).
98
Appropriate axial stops (examples)
Load suspension equipment (example)
Eyebolts
Spacing sleeves
Plastic-covered support arm for horizontal mounting (example)
Internal tensioning spindle (example)
SIMOTICS M-1FE1 synchronous built-in motors
Configuration Manual, 09/2019, A5E47872980B AA