Cad Creator (Title Below) - Siemens SIMOTICS M-1FE1 Configuration Manual

10.3

CAD CREATOR (title below)

CAD CREATOR
In the CAD CREATOR you will find the following quickly and easily:
● Dimension drawings
● 2D/3D CAD data
The CAD CREATOR supports you in the creation of system documentation regarding
project-specific information. The data for motors, drives and CNC controls is currently
available in the online version.
Note
The 3D model in the CAD CREATOR is a simplified representation that does not display
every detail.
You will find further information on the Internet at "CAD CREATOR
(http://www.siemens.com/cadcreator)".
Motors
● 1FK7, 1FT7, 1FT6 synchronous motors
● 1FE1 built-in synchronous motors
● 1FW3 complete torque motors
● 1FW6 built-in torque motors
● 1FK7, 1FT7, 1FT6 geared motors
● 1PH8 synchronous/induction motors
● 1PH7, 1PH4, 1PL6, 1PM4, 1PM6 induction motors
● 2SP1 motor spindles
● 1FN3 linear motors
SINAMICS S120
● Control Units
● Power Modules (blocksize, chassis)
● Line Modules (booksize, chassis)
● Line-side components
● Motor Modules (booksize, chassis)
● DC link components
● Additional system components
● Load-side power components
● Encoder system connection
● MOTION-CONNECT connection system
SIMOTICS M-1FE1 synchronous built-in motors
Configuration Manual, 09/2019, A5E47872980B AA
Dimension drawings
10.3 CAD CREATOR (title below)
135