Installing The Stator (Brief Description) - Siemens SIMOTICS M-1FE1 Configuration Manual

For joining by heating the spindle housing (shrink fit):
● Hot-air oven with temperature monitoring
– Oven volume appropriate for the stator type
– Placement of the oven in the immediate vicinity of the workplace
● Device for cooling the heated-up cooling jacket.
7.1.2.2

Installing the stator (brief description)

Figure 7-9
SIMOTICS M-1FE1 synchronous built-in motors
Configuration Manual, 09/2019, A5E47872980B AA
Procedure for mounting the stator
Mounting
7.1 Mechanical mounting
99