Checking Environment Monitoring Cables In The M200 Cabinet - Huawei UA5000 Manual

UA5000 Universal Access Unit
Environment Monitoring
Silk
Screen
JTD1-JTD7
J1
Specifications
Table 6-10
Table 6-10 Specifications of the PMIB01 sensor transfer box
Sensor Transfer Box
PMIB01
6.3 Checking Environment Monitoring Cables
The EPMU03 monitoring module monitors the environment parameters collected by the sensors
in real time, and reports the alarm information to the control system. Therefore, make sure that
the connections from the sensors to the ports of the PMIB01, from the PMIB01 to the EPMU03,
and from the EPMU03 to the control system are correct.

Checking Environment Monitoring Cables in the M200 Cabinet

Figure 6-7
6-11
whether the connections from the sensors to the PMIB01, from the PMIB01 to the EPMU03,
and from the EPMU03 to the control system are correct.
Issue 01 (2012-08-17)
Signal Port
Input ports of the
standby Boolean
value
DB50 port
NOTE
"JTD1-JTD7" are the input ports of the standby Boolean value. By default, the sensors are not configured.
You can determine the type of signal to be accessed. With related configuration, the monitor unit can
monitor them.
lists the specifications of the PMIB01 sensor transfer box.
shows the connections of environment monitoring cables in the M200 cabinet.
describes the cable connections. By referring to the cable connection diagram, check
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 EPS30-4815AF Monitoring Solution
Pin Function
l Pin 1 is for the +24 V power supply.
l Pin 2 is for the +12 V power supply.
l Pin 3 is for the signal cable.
l Pin 4 is for grounding.
According to the actual requirements, access related
passive digital signals to pins 2 and pin 3.
The port connects the monitoring transfer board and the
monitoring board to input the sensor signals and the
output the control signals.
Dimensions (W x D x H)
140 mm x 96 mm x 31 mm
Table
68