Sinumerik Industrial Pc - Siemens SINUMERIK 840DiE sl Manual

2 Hardware Descriptions

2.5 SINUMERIK Industrial PC

2.5 SINUMERIK Industrial PC
2.5.1 SINUMERIK PCU 50.3
*) Orientation with reference
to operation with OP 012
**) Fixing screws
Housing cover
Fig. 2-13 PCU 50.3: Perspective view with installed hard disk drive
Order number
Features
2-66
PCU as spare part with MCI board:
Designation
with Windows XP ProEmbSys and MCI board:
PCU 50.3–C/1.5 GHz, 512 MB SDRAM
PCU 50.3–P/2.0 GHz, 1024 MB SDRAM
The SINUMERIK industrial PC "PCU 50.3" provides, together with the MCI
board, the basis for the SINUMERIK 840Di sl. The PCU 50.3 has the following
important features:
S
Versions:
– Celeron M, 1.5 GHz, 512 MB SDRAM
– Pentium M, 2.0 GHz, 1024 MB SDRAM
S
Hard disk min. 40 GB (replaceable)
S
Operating system Windows XP ProEmbSys with Service Pack 2
S
Robust design (continuous operation, high noise immunity)
S
Compact dimensions for space–saving installation
S
Easy installation with four screws on the rear of the operator panel front
**)
Order No. (MLFB)
6FC5 220–0AA31–2AA0
6FC5 220–0AA33–2AA0
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
01/2007
top
*)
**)