Input/Output Image - Siemens SINUMERIK 840DiE sl Manual

8 PROFIBUS DP Communication
8.6 DP slave: MCP 310
8.6.6

Input/output image

Arrangement:
Keys and LEDs
LED09 LED01 LED02
S09 S01 S02
S10 S11 S12
S13 S14 S15
S16 S17 S18
S19 S20
Fig. 8-15 Designation of keys and LEDs
8-206
Notice
In the event of the failure of a machine control panel connected via MPI, the
following alarm is triggered by the PLC basic program:
S
Alarm "40026x machine control panel (x+1) failure"; with x = 0, 1
If the machine control panel is being operated as a DP slave, the user
(machine manufacturer) is responsible for triggering a corresponding alarm.
A key and the LED positioned above it form a logical unit. The key and the LED
have the same number.
S
Key: Sxy = Key number xy
S
LED: LEDxy = LED number xy
Fig. 8-20 shows the arrangement of keys and LEDs on the machine control
panel together with their internal designation. For the sake of clarity, the LED
designations are not shown in full.
LED03 LED21 LED22
S03 S21 S22
S04 S24 S25
S05 S27 S28
S06 S30 S31
S07 S33 S34
LED23 LED36 LED37 LED38
S23 S36 S37 S38
S26 S39 S40 S41
S29 S42 S43 S44
S32 S45 S46 S47
S35 S48 S49 S50
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
01/2007
LEDs
Key