System Components - Siemens SINUMERIK 840DiE sl Manual

1 General Information on the SINUMERIK 840Di sl
1.1 Overview of SINUMERIK 840Di sl
1.1.1

System components

1.1.2 System software packages and quantity frameworks
System software
packages
Quantity
framework
1.1.3 Hardware components
PCU
1-22
This manual refers to the following system components:
System components
SINUMERIK 840Di sl system software SW 1.4
SINUMERIK Industrial PC
PC operating system
MCI board
Notice
It is not possible to combine the named system components with older
versions.
The following system software packages are available for SINUMERIK 840Di sl:
S
6 axes system software
S
20 axes system software
The system software packages are each designed for the following quantities:
Basic
configuration
Axes 3
Channels 1
Mode groups 1
Channels per 1
mode group
Basic configuration: Default number of available components
Maximum: Maximum possible number of components with additional options
The hardware basis for the SINUMERIK 840Di sl is an industrial PC further
referred to as PCU (PC–Unit) from Siemens A&D, in conjunction with the
MCI board (Motion Control–Interface).
The SINUMERIK 840Di sl is available with the following PCU 50.3 versions,
each with 24 V power supply:
S
PCU 50.3–C: 1.5 GHz, 512 MB SDRAM
S
PCU 50.3–P: 2.0 GHz, 1024 MB SDRAM
Version
PCU 50.3–C: 1.5 GHz, 512 MB DRAM
PCU 50.3–P: 2.0 GHz, 1024 MB DRAM
Windows XP ProEmbSys
MCI2 board for 840Di sl
6 axes
Maximum Basic
configuration
6
2
2
2
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
01/2007
20 axes
Maximum
5 20
1 10
1 10
1
10