Di Start-Up - Siemens SINUMERIK 840DiE sl Manual

1 General Information on the SINUMERIK 840Di sl
1.5 840Di start–up
1.5 840Di start–up
Overview of the
functions
Menu bar
Context–sensitive
menu functions
1-38
When the control has booted, the export version can be identified by the addi-
tional character 'E' on the Service screen of the NCU version.
S
HMI Advanced (option): Diagnosis operating area > Service displays >
Version > Version NCU
Identification of control variants in this way is important for service personnel
and can also be helpful as evidence on export, especially when using the em-
bargo–exempt certificates provided for the export version.
The user interface 840Di start–up included in the scope of supply of the
SINUMERIK 840Di sl is intended as an initial introduction to SINUMERIK
840Di sl functionality.
The user interface comprises the following functions:
S
Display of main screens
S
Display of alarms and messages
S
Management of part programs
S
ASCII editor
S
NC, PLC, and PROFIBUS diagnoses
S
Logbook
The menu bar comprises the following menu commands:
S
File
S
Edit
S
Window
S
Display
The functions that can be called using the menu commands File and Edit are
context–sensitive, i.e. only those functions are offered that are possible in the
context of the currently active window.
Example:
S
The part program management window is selected. The menu command
Edit provides the following functions:
– Copy
– Paste
– Paste ...
– Load
– Unload
S
The window for display of the axis actual values is selected. The menu com-
mand Edit provides no further functions.
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
01/2007