To Stop The Product; To Switch Off The Product - Flymo EasiLife 200 Operator's Manual

Override schedule
•
• Spot cutting
4.3.1 Main area
Main area is the standard operating mode where
the product mows and charges automatically.
4.3.2 Secondary area (2nd area)
To mow secondary areas the operating mode
Secondary area (2nd area) must be chosen. In
this mode, the operator must move the product
manually between the main area and the
secondary area. The product mows until the
battery is empty. When the battery is empty, the
product stops and the message
charging shows in the product display. Put the
product in the charging station to charge the
battery. When the battery is charged, the product
moves out of the charging station and stops. The
product is now prepared to start operation, but
needs confirmation from the operator first.
Note: If you want to cut the main area after the
battery is charged, set the product to
mode before placing it in the charging station.
4.3.3 Park
Park means that the product
Operating mode
returns to the charging station where it remains
until a different operating mode is selected.
4.3.4 Park / Schedule
Park / Schedule means that the
Operating mode
product returns to the charging station where it
remains until the next schedule or standby
permits operation. Refer to
Standby on page 33 .
32 - Operation
Needs manual
Main area
Schedule and
4.3.5 Override schedule
The schedule settings can be temporarily
Override schedule . It is
overridden by selecting
possible to override the schedule for 3 h. It is not
possible to override a standby period.
4.3.6 Spot cutting
Spot cutting function is activated with the GO
The
button and is useful for quickly mowing an area
where the grass has been mown less than in
other parts of the yard. You must manually move
the product to the selected area.
Spot cutting means that the product mows in a
spiral pattern in order to cut the grass in the area
where it was started. When this is done, the
product automatically switches back to
Secondary area .
or

4.4 To stop the product

1. Push the STOP button on top of the product.
The product stops and the blade motor stops.

4.5 To switch off the product

1. Push the STOP button.
2. Open the hatch.
3. Push the ON/OFF button for 3 seconds.
4. The product shuts down.
Main area
1392 - 001 -