IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. The Loose Parts Pack is packaged underneath the deck of the product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd. Customer Service Department direct...
Page 3
6.A 13 Amp fuse must be fitted to the Mains Plug. CONNECTORS - IMPORTANT 7.The normal plug fuse and household fuse only protect the • Flymo connectors are suitable for use with 2 core cable electrical equipment and are not a safeguard against only. Under no circumstances should these connectors electrocution.
Assembly Instructions • The Loose Parts Pack is packaged underneath the deck. Assembly of Lower Handles to Deck 1. Place the bolt (A2) through the hole in the lower handle (A1) until the lower handle fits into the recess (A3) 2.
Visimo Only Grassbox Full Window (Visimo Only) • As the grassbox fills up, grass will be visible through grassbox the window (J). empty grassbox • When the window/grassbox is full it is time to empty full the grassbox. Cutting Height Adjustment Cutting Height Adjustment (K) &...
Removing and Fitting the Blade Switch off, wait until the blade has stopped rotating and disconnect from the mains electricity supply BEFORE at- blade bolt tempting to remove or refit the blade. Always handle the blade with care - sharp edges could cause injury.
Storing your Cable (Visimo & Rollermo only) • Your electric cable can be wrapped around the cable wrap wing knobs to enable tidy and safe storage (S1). Storing your Lawnmower: • Loosen the wing knobs to enable the handles to be folded over the product (S2).
Guarantee & Guarantee Policy If any part is found to be defective due to faulty manufacture Failures not covered by guarantee within the guarantee period, Husqvarna UK Ltd., through its Replacing worn or damaged blades. Authorised Service Repairers will effect the repair or replace- Failures as a result of not reporting an initial fault.