Flymo EasiLife 200 Operator's Manual page 29

3.10.10 ECO mode
If ECO mode is activated, it switches off the
signal in the boundary loop, the guide wire and
the charging station, when the product is parked
or is charging.
ECO mode to save energy and avoid
Note: Use
interference with other equipment, for example
hearing loops or garage doors.
Note: To start the product manually in the work
area, push the STOP button before you remove
the product from the charging station. If not, the
product can not be started in the work area.
3.10.10.1 To set the ECO mode
To get access to the menu
1. Do steps 1–3 in
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Installation > ECO mode .
3. Push the OK button to select the
mode .
4. Push the BACK button.
3.10.11 To avoid collisions with the mower
house
If you have installed a mower house (available as
accessory), the wear on the product and the
mower house decreases when you select
house collisions .
To get access to the menu
1. Do steps 1–3 in
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Installation > Mower house > Avoid house
collisions .
3. Push the BACK button.
Avoid house collisions is selected it can
Note: If
result in grass that is not cut around the charging
station.
3.10.12 FrostSense
The grass is extra sensitive to wear if the yard is
FrostSense is activated,
covered with frost. If the
the product is not allowed to start to cut the grass
if the temperature is below 5° C / 41° F.
1392 - 001 -
Note: The
chassis and there can be a delay compared to
the ambient temperature.
3.10.12.1 To set the FrostSense
1. Do steps 1–3 in
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Installation > FrostSense .
3. Push the OK button to select
4. Push the BACK button.
3.10.13 Bluetooth
The product can connect to mobile devices that
have the Flymo app installed. Flymo is a free app
for your mobile device. The short-range
interaction with the product is called Bluetooth
When pairing between the product and app has
been confirmed, you have access to the menus
Settings >
and functions as long as you are within short-
range (Bluetooth
ECO
3.10.13.1 To pair the Flymo app and the product
1. Download the Flymo app on your mobile
device.
2. Do steps 1–3 in
on page 23 .
3. Use the arrow buttons and the OK button to
move through the menu structure
Avoid
Installation > Bluetooth > New pairing .
4. Follow the instructions in the app.
3.10.14 General
General you can change the general settings
In
Settings > of the product.
3.10.14.1 To set the time & date
1. Do steps 1–3 in
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
General > Time & Date .
3. Use the arrow buttons to set the time and
then push the BACK button.
4. Use the arrow buttons to set the date and
then push the BACK button.
5. Use the arrow buttons to set the time format
and then push the BACK button.
FrostSense is located inside the
To get access to the menu
FrostSense .
®
®
).
To get access to the menu
To get access to the menu
Installation - 29
Settings >
®
.
Settings >
Settings >