Table of Contents
Advertisement
3.10.3.1 Wizard
The wizard is a quick tool to find suitable
schedule settings for your lawn.
To get access to the menu
1.
Do steps 1–3 in
on page 23 .
2.
Use the arrow buttons and the OK button to
move through the menu structure
> Wizard .
3.
Enter your estimated lawn size. It is not
possible to enter a larger lawn size than the
maximum work capacity.
4.
Push the OK button to confirm the lawn size.
By entering your lawn size the wizard
suggests either a suitable daily schedule
(refer to step 7) or need input for inactive
days.
5.
Choose what day(s) the product should be
inactive. Use the up/down arrow buttons to
shift between days.
6.
Push the OK button to confirm the chosen
inactive day(s).
7.
The wizard suggests a daily schedule for the
active days. If you want to move the
schedule interval to earlier or later in the day
then push the arrow buttons up or down.
8.
Push the OK button to confirm the daily
schedule. An overview of the daily schedule
is presented. Push the OK button to go back
to main menu.
Note: To change the schedule settings for
individual work days use the
Advanced menu.
3.10.3.2 To set the schedule
1.
Do steps 1–3 in
To get access to the menu
on page 23 .
2.
Use the arrow buttons and the OK button to
move through the menu structure
> Advanced > Overview .
3.
Use the arrow buttons and the OK button to
select the day.
4.
Use the left arrow button to select the
period.
5.
Push the OK button.
6.
Calculate the suitable operating hours. Refer
To calculate the suitable operating hours
to
on page 24 .
24 - Installation
7.
Schedule
8.
3.10.3.3 To calculate the suitable operating hours
If the work area is less than maximum product
capacity, the schedule should be set to minimize
wear on the lawn and the product.
1.
2.
3.
Note: The daily operation capacity is approximate
and depends on the inbuilt standby period. Refer
to
Schedule >
Example: A lawn of 500 m
Schedule
Flymo EasiLife specified for 500 m
500 m
5400 ft
Enter the time with the arrow buttons. The
product can cut the grass 1 or 2 periods
each day.
If the product must not cut grass on a
specified day, unselect the box adjacent to
the 2 time periods.
Calculate the dimension of your lawn in m
2
ft
.
2
2
Divide the m
/ ft
of the lawn with the
approximate daily operation capacity. Refer
to table below.
The result is equal to the number of hours
that the product must mow each day. The
number of hours includes both mowing,
searching and charging time.
Schedule and Standby on page 33 .
Product work ca-
Approximate daily opera-
pacity
tion capacity, m
2
2
500 m
/ 5400 ft
41 / 440
2
2
350 m
/ 3800 ft
45 / 480
2
2
200 m
/ 2150 ft
40 / 430
2
2
/ 41 ≈ 8.5 h.
2
/ 440 ≈ 8.5 h.
Days / week
h / day
7
8.5
2
/
2
2
/h, ft
/h
2
/ 5400 ft
, cut with a
2
.
Suggested
schedule setting
07:00-15:30 /
7:00 am-3:30 pm
1392 - 001 -
- Quick Links:
- Introduction - Installation
Hide quick links:
Advertisement
Table of Contents
