Operation; The On/Off Button; To Start The Product; Operating Modes - Flymo EasiLife 200 Operator's Manual

Robotic lawn mower
Hide thumbs Also See for EasiLife 200:
Table of Contents

Advertisement

4.1 The ON/OFF button

WARNING: Read the safety
instructions carefully before you start
the product.
WARNING: Keep your hands and feet
away from the rotating blades. Never
put your hands or feet close to or
under the machine when the motor is
running.
WARNING: Do not use the product
when persons, especially children, or
animals, are in the work area.
Push the ON/OFF button for 3 seconds to
switch on the product. The product is active
when the indicator lamp on the keypad is lit.
Push the ON/OFF button for 3 seconds to
switch off the product.
4.1.1 The indicator lamp
WARNING: It is only safe to carry out
inspection or maintenance on the
product when the product is disabled.
The product is disabled when the lamp
on the keypad is not lit.
The indicator lamp on the keypad is an important
status indicator:
The product is active if the indicator lamp
lights continuously.
The product is in standby if the indicator
lamp flashes. This means that the operator
1392 - 001 -

4 Operation

must push the ON/OFF button for 3 seconds
to make the product active again.
The product is disabled when the indicator
lamp is not lit.

4.2 To start the product

1.
Open the hatch to the keypad.
2.
Push the ON/OFF button for 3 seconds. The
display is lit up.
3.
Use the up/down arrow buttons and the OK
button to enter the PIN code.
4.
Select the desired operating mode and
confirm with the OK button. Refer to
Operating modes on page 31 .
5.
Close the hatch.
Note: If the product is parked in the charging
station, the product only leaves the charging
station when the battery is fully charged and if the
schedule allows the product to operate.
Note: The first weeks after installation the
perceived sound level when cutting the grass
may be higher than expected. When the product
has cut the grass for some time, the perceived
sound level is much lower.

4.3 Operating modes

Push the Mode button to select the following
operating modes:
Main area
Secondary area (2nd area)
Park
Park / Schedule
Operation - 31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Easilife 500Easilife 350

Table of Contents