Table of Contents
Advertisement
Additional safety warnings
Electrical safety
DANGER! Cardiac arrest!
This product makes an electromagnetic field while it operates. This
field may under some conditions interfere with active or passive medical
implants. To decrease the risk of conditions that can possibly injure or
kill, we recommend persons with medical implants to speak with their
physician and the medical implant manufacturer before you operate the
product.
Do not use under wet conditions.
Do not operate in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
Personal safety
DANGER! Risk of suffocation!
Small parts can be easily swallowed. There is also a risk that the poly-
bag can suffocate toddlers. Keep toddlers away when you assemble the
product.
Do not disassemble the product further than the delivery status.
Use gloves, wear slip resistant shoes and wear eye protection.
Do not overload the mower.
Never operate the product when you are tired, ill or under the influence of alcohol,
drugs, or medicine.
Danger of slipping:
– in wet grass
– on steep slopes
– during transport
Be careful while going backwards.
2. ASSEMBLY
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Disconnect the product from the mains and use gloves before
you assemble the product.
For further advice or repairs, contact your local dealer.
Assembling the handle:
1. Insert the lower handles into the holes provided in the deck.
Secure with the wing knob (Fig. A1).
2. Attach the upper handle to the lower handles with the wing knob
(Fig. A2).
The upper handle is height adjustable. The handles can be fixed in position
I or II as desired (Fig. A2).
Note: Ensure that the cable clips are used to fix the cable to the
handle.
Attach the cable to the cable hook ensuring that sufficient cable slack is
available.
Ensure the cables are not trapped when folding and unfolding the top
handles. Do not drop the handles.
Assembling the grassbox:
1. Push the grassbox handle into the slots in the grassbox upper until it
clicks securely into position (Fig. B1).
2. Connect the two parts of the grassbox together, then install the tongue
(Fig. B2).
3. Starting at the rear of the grassbox, install the grassbox cover into the
grassbox with the clips.
Ensure all clips are correctly located (Fig. B3).
4. Attach the complete grassbox to the lawnmower (Fig. B4).
a. Lift the safety guard.
b. Make sure the discharge chute is clean and free from debris.
c. Install the fully assembled grassbox onto the location points at the
rear of the deck as illustrated.
d. Place the safety flap on top of the grassbox.
Note: If you do not want to collect the grass, the lawnmower can be used
without the grassbox. The safety guard must be in the down position.
21361-85.960.01.indd 5
21361-85.960.01.indd 5
Adjusting the cutting height:
WARNING!
Release the lever and wait until the motor stops before adjust-
ing the height. The blades continue to rotate for a few seconds
after the machine is switched off. A rotating blade can cause
injury.
Adjust the cutting height by moving the height adjustment handle (Fig. C).
Five cutting heights are available on this product.
Note: A medium height of cut is recommended for most lawns.
3. OPERATION
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Wait for the blade to stop, disconnect the product from
the mains and use gloves before you adjust or transport
the product.
To start the lawnmower:
DANGER! Risk of injury!
Risk of injury if the product does not stop when you
release the start lever.
v Do not bypass the safety devices or switches. For example
do not attach the start lever to the handle.
To start:
1. Squeeze the start / stop lever (Fig. D1) towards the handle.
2. Press and hold the safety button (Fig. D2).
3. Release the safety button.
IMPORTANT!
Make sure the blade stops rotating before switching on again.
Do not rapidly switch on and off.
To stop:
v Release the pressure on the start / stop lever.
Grassbox full window:
As the grassbox fills up, grass will be visible through the window.
When the window / grassbox is full it is time to empty the grassbox.
How to mow:
1. Start mowing the edge of the lawn nearest to the power point so the
cable is laid out on the lawn you have already cut (Fig. E).
2. Mow twice a week during the growing season. Your lawn will suffer
if more than a third of its length is cut at one time.
DO NOT OVERLOAD YOUR LAWNMOWER.
Mowing long thick grass may cause the motor speed to drop. You will
hear a change in the motor sound. If the motor speed drops you may
overload your lawnmower which may cause damage. When mowing in
long thick grass a first cut with the cutting height set higher will help
reduce the load. See Adjusting the cutting height.
4. MAINTENANCE
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Wait for the blade to stop, disconnect the product from the
mains and use gloves before you maintain the product.
Service recommendations:
Your product is uniquely identified by a silver and black product rating
label.
We strongly recommend that your product is serviced at least every twelve
months, preferably by a professional.
5
05.10.21 15:18
05.10.21 15:18
Advertisement
Table of Contents
