Mercedes-Benz S-Class 2020 Operator's Manual page 527

Display messages Possible causes/consequences and
ë
* The HOLD function is deactivated because the vehicle is slipping or a condition for activation is not fulfilled.
Off
ç
* Active Distance Assist DISTRONIC cannot be activated as not all activation conditions are fulfilled.
- - - mph
ç
* If you depress the accelerator pedal beyond the Active Distance Assist DISTRONIC setting, the system will be put
Suspended
Once the cause of the problem is no longer present, the driving systems and driving safety systems will be available
again.
If the display message does not disappear:
Stop the vehicle in accordance with the traffic conditions.
#
Clean the windshield.
#
Reactivate the HOLD function later or check the activation conditions for the HOLD function (
#
Comply with the activation conditions of Active Distance Assist DISTRONIC (
#
into passive mode ( page 223).
/
Display messages and warning/indicator lamps 525
M M Solutions
page 225).
/
page 214).
/