474 Wheels and tires
* NOTE Vehicle damage from the jack
If you do not position the jack correctly at
the appropriate jack support point of the
vehicle, the jack could tip over with the vehi‐
cle raised.
The jack is designed exclusively for
#
jacking up the vehicle at the jack sup‐
port points.
Take the ratchet wrench out of the tire-
#
change tool kit and place it on the hexagon
nut of the jack so that the letters "AUF" are
visible.
Position jack
2
at jack support point 1.
#
Turn ratchet wrench
3
clockwise until jack
#
2
sits completely on jack support point
and the base of the jack lies evenly on the
ground.
Continue to turn ratchet wrench
#
tire is raised a maximum of 1.2 in (3 cm) off
the ground.
Loosen and remove the wheel (
/
#
Removing a wheel
Requirements:
The vehicle is raised (
R
Mercedes-AMG vehicles: observe the notes in
the Supplement. Otherwise, you may fail to rec‐
ognize dangers.
When changing a wheel, avoid applying any force
to the brake discs, since this could impair the
level of comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
Do not place wheel bolts in sand or on
#
a dirty surface.
Unscrew the uppermost wheel bolt com‐
#
pletely.
1
3
until the
page 474).
page 472).
/