Example: vehicles without a reclining rear seat
Press and hold the corresponding memory
#
position switch 1, 2 or 3 until the rear seat is
in the stored position.
%
Seat adjustment is interrupted as soon as
you release the preset position button.
The adjustment of the active multicontour
seat is still carried out.
Operating the front passenger seat and rear
seats via the memory function in the rear
passenger compartment
Requirements:
For selecting the front passenger seat: the
R
power supply is switched on
Storing
Front passenger seat adjustments and rear seat
adjustments for up to three people can be
stored and called up using the memory function
in the rear passenger compartment.
The following settings can be stored for the front
passenger seat:
Position of the seat, backrest and head
R
restraint
The following settings can be stored for the rear
seats:
Position of the seat, backrest and head
R
restraint
Active multicontour seats: the seat side bol‐
R
sters of the seat backrest as well as the con‐
Seats and stowing 123
tour of the seat backrest in the lumbar and
shoulder regions
Seat heating: distribution of the heated sec‐
R
tions of the seat cushion and seat backrest
The following settings are also stored to a mem‐
ory position, if the indicator lamp in the v
button lights up:
Position of the footrest of the front
R
passenger seat, if available
Position of the screen, if available
R
Using the preset position buttons, you always
store the current setting of each seat.