Mercedes-Benz S-Class 2020 Operator's Manual page 443

Press and hold button 1 for at least five
#
seconds.
The vehicle is adjusted to the height of the
last active drive program. Indicator lamp
goes out.
Drive the vehicle off the transporter.
#
4MATIC vehicles
Make sure that the front and rear axles come
#
to rest on the same transportation vehicle.
* NOTE Damage to the drivetrain due to
incorrect positioning
Do not position the vehicle above the
2
#
connection point of the transport vehi‐
cle.
Towing eye storage location
Towing eye 1 is located with the vehicle tool kit
under the trunk floor.
Breakdown assistance 441
Installing the towing eye
Press the mark on cover 1 inwards and
#
remove.
Screw in the towing eye clockwise as far as it
#
will go and tighten.
% Make sure that cover 1 engages in the
bumper when you remove the towing eye.