Mercedes-Benz S-Class 2020 Operator's Manual page 487

* NOTE Engine damage caused by an
incorrect oil filter, incorrect oil or addi‐
tives
Do not use engine oils or oil filters other
#
than those which meet the specifica‐
tions necessary for the prescribed
service intervals.
Do not alter the engine oil or oil filter in
#
order to achieve longer change intervals
than prescribed.
Do not use additives.
#
Have the engine oil changed after the
#
prescribed intervals.
Mercedes-Benz recommends that you have the
oil change carried out at a qualified specialist
workshop.
Further information on engine oil and oil filters is
available at the following locations:
In the Mercedes-Benz Specifications for
R
Operating Fluids by entering the designation
At https://bevo.mercedes-benz.com
-
In the Mercedes-Benz BeVo app
-
At a qualified specialist workshop
R
Quality and capacity of engine oil
MB-Freigabe or MB-Approval
Sedan Engine oil specifica‐
tions
S 450 4MATIC 229.5
229.6*
S 560 4MATIC 229.52
229.61*
MB-Freigabe or MB-Approval
Long wheelbase Engine oil specifica‐
vehicles tions
S 450 229.5
S 450 4MATIC 229.6*
All other models 229.52
229.61*
Technical data 485
MB-Freigabe or MB-Approval
Mercedes‑Maybach Engine oil specifica‐
tions
S 650 Mercedes-May‐ 229.5
bach
S 560 4MATIC 229.52
Mercedes-Maybach
229.61*
* Recommended for lowest possible fuel con‐
sumption (lowest SAE viscosity class in each
case; observe possible restrictions of the
approved SAE viscosity classes).
To achieve the lowest possible fuel consumption,
it is recommended to use the engine oil specifi‐
cations marked in the table for the lowest SAE
viscosity class. Possible restrictions of the
approved SAE viscosity classes must be
observed.
S 650 Mercedes-Maybach: Only use SAE
0W-40 or SAE 5W-40 engine oils.
The following values refer to an oil change,
including the oil filter.