Table of Contents
Advertisement
3.
Thread the serrated nut onto the quick mount stud (4) and hand tighten (do not overtighten).
4.
Align the pivot grooves (2) on the bracket with four of the bracket mount holes (1) on the mounting plate. Follow these
guidelines:
—
Each of the four pivot grooves on the bracket must be attached to at least one bracket mount hole on the
mounting plate.
—
The final desired orientation of the mounting plate and router determine which bracket mount holes are used.
—
Mount the router as described in
5.
Insert one bolt assembly (3) through one of the pivot grooves (2) on the bracket and then through the corresponding
bracket mount hole on the mounting plate.
6.
Repeat Step 5 for the remaining bolt assemblies.
7.
Position the mounting bracket onto the mounting plate as needed before further tightening the bolts.
8.
Use a socket wrench to evenly tighten all four bolts and the serrated nut to finish installing the bracket on the plate.
Use a torque of 6-7 foot-pounds when tightening the bolts and nut.
Figure 34
Mounting Bracket Attached to Mounting Plate
1
2
3
Router Orientation, page
54.
61
4
5
6
Advertisement
Table of Contents
