Table of Contents
Advertisement
Required Materials
Security panel and the hardware (three 8-32 PNH screws) included in the mounting bracket kit.
Phillips screwdriver
Figure 38
Security Panel Details
1
Item
Description
1
Insert the security panel tabs into the corresponding notches on the mounting bracket.
2
Secure the security panel to the bracket at these locations, using the screws included in the
Kit, page
51.
3
Insert the captive screw located in the router door lock block through this hole when closing the router door.
To install and secure the security panel to the bracket and router:
1.
Loosen the captive bolt that is located inside router door lock post. For lock post location, see
2.
Install the security panel on the bracket by inserting the security panel tabs into the corresponding slots on the
bracket as shown in
Figure 39 on page
Note:
For clarity, the router is not shown here. During this procedure, the router is mounted in the bracket.
65.
64
2
3
Mounting Bracket
Figure 57 on page
82.
Advertisement
Table of Contents
