Table of Contents
Advertisement
Figure 45
Router Grounding Kit Contents
Item
Description
1
Grounding lug
2
Screws
Materials You Supply
You must provide the tools listed in
Ground the Router
Note:
You can perform these steps when the mounting bracket security panel is installed.
To ground the router:
1.
Use the appropriate crimping tool or pliers to crimp the 6-gauge ground wire (included in the grounding kit) to the
grounding lug.
2.
Connect the grounding lug to the router chassis ground connection point shown in
supplied grounding screws.
Note:
Tighten the grounding screws to 10 to 12 foot-pounds of torque. Do not overtighten!
3.
If necessary, strip the other end of the ground wire and connect it to a reliable earth ground, such as a grounding
rod or an appropriate grounding point on a pole that is grounded.
1
Qty.
1
2
Materials and Tools You Supply, page
2
54.
70
Figure 46 on page 71
using the
Advertisement
Table of Contents
